
Hillcrest American Oak Engineered | Amazon Wood Floors
Amazon Wood · Diamond Series Collection
Warm-toned water-resistant flooring in muted greige-taupe hue. Hillcrest from Amazon Wood Floors — 14.29mm, 3mm wear. Available at Kapriz Santa Clara.
- 9-1/2″ wide × up to 87″ long
- 9/16″ thick
- 3mm top veneer
- Glue-down, staple/nail-down, and floating are all approved installation methods. Work from several cartons at once for color/shade mix. End joints should never be closer than 10" apart. Engage tongue-and-groove by hand. Avoid an "H"-shape pattern. Leave a minimum 1/2" expansion space around the perimeter. Staple/nail: 1-1/2" staples/cleats for 1/2"-5/8" thick flooring, 2" for 3/4" thick, fastened every 4"-5".
- 25 Year Residential Finish / 5 Year Light Commercial Finish; Lifetime Structural
Overview
Hillcrest carries a muted greige-taupe tone that leans warm without turning golden. Amazon Wood Floors grades this collection A/B -- Clear to Select -- so the surface stays clean and consistent. At 9-1/2 inches wide, each plank reads as a broad, continuous strip rather than a run of narrow boards, and the engineered American Oak construction suits kitchens, living rooms, hallways, and other everyday spaces. This floor suits someone who wants a clean, consistently graded oak floor with a calm, low-drama grain and minimal knots.
Hillcrest's 9-1/2 inch plank reads as one continuous strip, not a run of narrow boards.
Product Questions
What is Hillcrest?
Hillcrest is a real-wood engineered hardwood floor built around a muted greige-taupe color, with small knots and balanced natural grain for a smooth, welcoming look.
Is it waterproof?
No engineered hardwood is truly waterproof. The core resists moisture-driven movement better than solid timber, so it's more commonly approved for basements and concrete slabs — subject to the manufacturer's installation and moisture-testing requirements — but the real-wood veneer still needs spills addressed and prolonged standing water avoided.
Can it be refinished?
A professional gauges refinishing by the wear layer — the real wood veneer, not the total plank height. With its 3mm layer, Hillcrest leaves enough real wood on top for a professional refinish when the time comes. A buff-and-recoat or a deep clean covers most day-to-day wear in the meantime — keep the deeper sand-down in reserve, and have a flooring professional confirm the veneer depth first.
What does the plank surface look like?
Up close, Hillcrest shows a tight, straight grain with a quiet, soft-flowing figure -- one grain line runs continuously across two boards, with a few faint, pin-sized mineral flecks near the lower edge. It's American Oak engineered hardwood, finished with a soft-brushed, white-washed UV-cured lacquer -- a real oak veneer over an 8-ply engineered core, not a printed surface. Grain and mineral marks vary naturally from plank to plank, which is what a real wood floor offers that a repeating factory pattern can't. At this A/B, Clear-to-Select grade, knots stay sparse and small: expect the occasional pin-sized knot rather than heavy character marks.
Will this color work in my room?
This muted greige-taupe shade sits on the lighter, cooler-leaning end of Amazon Wood Floors' warm palette -- not a golden honey oak and not a cool gray, but something between the two. In a bright room it reads soft and neutral; in a room with less natural light, expect it to read a shade deeper while keeping its warm undertone. It works with both warm wood-tone furnishings and cooler whites and grays, so it doesn't lock you into one design direction.
Will it match my cabinets?
Specifications
| SKU | DS-9169522 |
|---|---|
| Brand | Amazon Wood Floors |
| Collection | Diamond Series |
| Color | Hillcrest |
| Flooring Type | Engineered Hardwood |
| Plank size | 9-1/2 inches wide × up to 87 inches long |
| Thickness | 9/16″ |
| Grade | A,B (Clear to Select) |
| Species | American Oak (Quercus) |
| Top veneer | 3mm |
| SF per carton | 34.1 sq ft |
| Installation grade | Above, On, Below grade |
| Installation method | Glue-down, staple/nail-down, and floating are all approved installation methods. Work from several cartons at once for color/shade mix. End joints should never be closer than 10" apart. Engage tongue-and-groove by hand. Avoid an "H"-shape pattern. Leave a minimum 1/2" expansion space around the perimeter. Staple/nail: 1-1/2" staples/cleats for 1/2"-5/8" thick flooring, 2" for 3/4" thick, fastened every 4"-5". |
| Waterproof | No — water-resistant only |
| Warranty | 25 Year Residential Finish / 5 Year Light Commercial Finish; Lifetime Structural |
| Certifications | CARB 2 Compliant, German E-1 adhesive formaldehyde standard |
General Installation & Care
General guidance for engineered hardwood installation and care. For this product’s installation requirements and warranty, follow the manufacturer’s current documents.
View General Installation & Care GuideWhy Customers Choose Kapriz
More selection. Better value. Service you can count on.
Direct Manufacturer Pricing
We buy in volume and pass the savings to you.
50+ Flooring Brands
A wide selection of styles, colors, and finishes.
Local & Nationwide Delivery
Convenient shipping options for your project.
Installation Support
Connections to trusted flooring contractors.




















